Table of Contents
Advertisement
Surface cooling by free convection: Cooling method IC 410 according to EN / IEC 60034-6
IC410
Figure 3-1
3.3.3
Bearings
To support the machine shaft and maintain its position in the non-moving part of the machine,
DE and NDE rolling bearings are used. One end performs the function of a locating bearing that
transfers axial and radial forces from the rotating machine shaft to the non-moving part of the
machine. The opposite end is implemented as a floating and support bearing to allow thermal
expansion inside the machine and transfer radial forces.
The nominal (theoretical) service life of the bearings according to ISO 281 is at least 20,000
hours when the permissible radial/axial forces are complied with, and the machine is operated
on 50 Hz line supplies. However, the achievable useful life of the bearings can be significantly
longer in the case of lower forces (e.g. operation with self-aligning couplings).
Rolling bearings with permanent lubrication are maintenance-free.
3.3.4
Balancing
As standard, the machine is designed with vibration severity level A. The rotor is dynamically
balanced with a half feather key (code "H").
Vibration severity level B can be ordered as option, and stamped on the rating plate.
3.3.5
Types of construction/method of installation
The type of construction of the machine is stated on the rating plate.
Basic type of construction code
IM B3 (IM 1001)
Basic type of construction code
IM B5 (IM 3001)
1PC1423 roller-table motors SH 112 ... 400
Operating Instructions
IC4A1A0
IC410
Description
3.3 Installation
Diagram
Diagram
25
Advertisement
Table of Contents
