Sony Trinitron KV-27XBR95S Operating Instructions Manual page 60

Using Timer-Activated Functions
Setting the clock — CURRENT TIME SET
(Contd. from prev. page}
Remote Commander (Outer panel)
Click the rocker control.
The hour and anvpm displays tum red.
Each time you press the rocker control up or down, the hour
8 Press the rocker control up or down to set "3:00PM."
changes in sequence beginning with *12:00AM."
CURRENT TIME SET
MON 3:00 PH
Steer
Set the time.
serecrG> seromep erst ED
| Click the rocker control.
The minute display tums red.
60 | Chapter 3: Using Advanced Features
(minutes).
Each time you press the rocker control up or down, the
minutes change in sequence.
1 Press the rocker contro! up or down to select "15"
OCURRENT TINE SET
MON 3:15 PM
START
Set the time.
oe anee® arr Gp
Click the rocker control.
The cursor points to "START.°
Check the actual time, and click the rocker control
to start the clock.
The setting is complete.
To reset the time
Display the CURRENT TIME SET screen and repeat steps
§- 12,
To display the current time
Press DISPLAY.
To return to the previous menu
Press the rocker contro! up or down until the cursor points
to * > MENU."
Then click the rocker control.
To return to the main menu
Repeat the above, until you reach the main menu.
To return to the normal screen.
Press MENU on the Remote Commander.