Table of Contents
Advertisement
Click the rocker control.
The CH ERASE/ADD screen appears, and the cursor points to "ERASE."
ESCH ERASE/ADD
DERASE
ADD
Select
the channel.
ERASE: CHANNEL
+/-
ADD:
(0-9)+CENTER]
sevect@D nevurnG@D erst GERD
Press CH +/— to select the channel you want to erase.
The channel display appears.
CH
:
10
ESCH ERASE/ADD
PERASE
ADD
2
Select
the channel.
ERASE: CHANNEL
+/-
ADD:
[0-9]J+CENTER]
sececr€> eeruenep exit GD
Click the rocker control.
A "sign appears in front of the channel number display, indicating that the channel
is erased; then the CH ERASE/ADD screen automatically reappears.
EICH ERASE/ADD
pERASE
ADD
>
Select
the channel.
ERASE: CHANNEL
+/-
ADD:
[0-9]+LENTER]
stuectG> revue @ exit GE)
To erase another channel
Repeat steps 6 — 7.
To return to the previous menu
Press the rocker control up or down until
the cursor points to " > MENU."
Then click the rocker control.
To return to the main menu
Repeat the above, until you reach the
main menu.
To return to the normal screen
Press MENU on the Remote Commander.
Note
If you erase a VHF or UHF channel, the same
number cable TV channel is also erased (and
vice versa).
sjouueyd
AL Gumesaig
Chapter
1: Setting Up | OO
Advertisement
Table of Contents
