Sony Trinitron KV-27XBR95S Operating Instructions Manual page 52

Adjusting the Sound
ois} (sreudlalemsle mii Mom eluiellereder-ialals] mM mestole lace) mastere( =
Follow these instructions to select an MTS mode.
Select MAIN mode to listen to stereo sound.
The STEREO lamp on the TV lights up whenever a stereo
broadcast is received.
Select SAP mode to listen to Second Audio Programs.
Select MONO mode to eliminate excessive noise during
stereo broadcasts, caused by a weak incoming signal.
Note
If the TV is in video mode, the "MTS" display is shaded and cannot
be selected.
Press TV/VIDEO on the TV or on the Remote Commander to
change to TV mode.
Remote Commander (Outer panel)
Press MENU.
The main menu appears.
>GIPROG PALETTE
EEMODE SET
ESET up
QOENGLISH
seecrG> eetumg> e211 ED
Press the rocker control up or down until the cursor
points to "MODE SET."
52 | Chapter 3: Using Advanced Features
Click the rocker control.
The mode set menu appears.
Press the rocker control up or down until the cursor
points to "MTS."
Click the rocker control.
The mode display tums red.
Press the rocker control up or down to select the mode
you want.
Each time you press the rocker control up or down, "MAIN,"
"SAP" and "MONO" appear in sequence.
Click the rocker control.
The mode is selected.
To return to the previous menu
Press the rocker control up or down until the cursor points to
" > MENU." Then click the rocker control.
To return to the main menu
Repeat the above, until you reach the main menu.
To return to the normal screen
Press MENU on the Remote Commander.