Sealing Envelopes And Printing Postage - Pitney Bowes SendPro C Auto User Manual

4. Unscrew the moistener bottle cap and fill it with Pitney Bowes Sealing solution. Do not overfill
the moistener bottle.
5. Screw the cap back on and place the bottle back in its original site (upside down in the device).
6. Close the feeder access cover.
7. If the tank is empty, allow 30 minutes for the moistener brush and wick to get completely wet.

Sealing envelopes and printing postage

Use the moistener on your device to seal your envelopes before you print postage.
Pitney Bowes User Guide December 2023
7 • Sealing
55