Sealing Envelopes Without Printing Postage - Pitney Bowes Connect+ Series Operator's Manual

Sealing envelopes without printing postage

You can create a job to seal envelopes without printing postage. If your system uses accounting, a piece
count will be included in accounting reports.
Follow the steps below to create a seal only job. If you have already created a seal only job,
and begin running mail.
1. Select the Run Mail button from the Home screen.
2. Select the Options button.
3. Select Create new job....
4. Select Seal only, no Printing.
Note:
Print date is off in Seal only job.
5. Select OK. The job appears in a new job tab.
6. Select Start to begin feeding and sealing envelopes.
7. If you want to save this job, select Save as.
8. Type in the job name and select OK.
Weighing, rating and counting mail without printing postage
If your system uses accounting, you can create a job to weigh, rate and count mail without printing
postage. In addition, you can add a graphic ad to the mail piece. The weighing and rating information, as
well as the piece count, will be included in accounting reports.
Follow the steps below to create a count only job. If you have already created a count only job,
job and begin running mail.
Pitney Bowes Connect+ Series Operator Guide April, 2016
Using jobs
open the job
open the
Page 54 of 367