Connecting Sensors; Wiring - Siemens Simcenter SCADAS RS User Manual

13. Pin-out & wiring

Connecting sensors

Wiring

This section shows how sensors are to be wired and to which unit(s) they can be connected.
The part shown in gray blue is within the unit.
Analog sensor
Full bridge 6-wire (sense
lines)
Full bridge (4 wire)
Half bridge 5-wire (sense
lines)
Half bridge 3-wire
13-4
Wiring / Unit(s)
User Manual Simcenter SCADAS RS system, Simcenter Testlab
© 2023 Siemens