[_Printing
with Bubble
Jet Direct
%_ Start printing.
_
Turn the <O>
dial to select
[Print],
then
press
<_>.
#_ The printing
will start.
_
When
the printing
ends,
the screen
will return
to step 1.
_
To stop the printing,
press
<_>
while
[Stop]
is displayed,
then
turn the
< O > dial to select
[OK] and press
If [Bordered]
is set, the date might be imprinted on the border, depending
on the pr nter
[]
_ If [Date] is [On], the date recorded for the image will appear on the print.
The date will appear on the lower right of the image.
_ If you select [Stop] during the printing, the picture being printed will stop
printing and the paper will be discharged.
_ If a problem occurs during printing, an error message will appear on the
camera's LCD monitor. Select [Stop] or [Continue].
If you select
[Continue]
and the printer does not resume printing, it will resume
automatically
after you resolve the problem.
_/ If you are using a BJ printer equipped
with an operation display panel.
the error No. will be displayed if an error occurs. To resolve the respective
error, refer to the BJ printer's instruction
manual.
128