Canon EOS 20D Instruction Manual page 25

Installing and Removing the CF Card
Removing the CF Card
Access lamp
Open the cover.
_ Turn the <%_> switch to <OFF>.
,r_ Check that the "buSY" message is
not displayed on the LCD panel.
_ Make sure the access lamp is off,
then open the cover.
'_'_j>>j,,, Remove the OF card.
_ Press the Eject button.
#_ The CF card will be ejected.
_ Close the cover.
U
A blinking access lamp indicates that data is being read, written, or
erased on the CF card or that data is being transferred. Never do
the following while the access lamp is lit or blinking. Such actions
may destroy the image data. It may also damage the CF card or
camera.
• Shaking
or banging the camera around,
• Open the CF card slot cover.
• Removing
the batten].
If "Err CF" (Error CF) is displayed on the LCD panel, see page 114
If you use a low-capacity CF card. it might not be able to record large
images.
A Microdrive is vulnerable to vibration and physical shock. II you use a
Microdrive. be careful not to subject the camera to vibration or physical
shock especially while recording or displaying images.
[_ On the menu. ifyou set the [a Shoot w/o card] to [Off], it will prevent
shooting without a CF card. (p.90)
25