Nikon ECLIPSE E400 Instructions Manual page 32

1
| Model Name: ECLIPSE E400 (microscope main body)
Focusing Mechanism
@ Range of stage vertical motion:
Stage
© Provided with a knob torque adjustment mechanism
@ Provided with a rotation mechanism
Revolving Nosepiece
@ Locking type with five-holes
Illumination
@ Internal Koehler-type diascopic illumination optics
© Provided with a PHOTO switch (5-level fine adjustment selector)
O Lamp rating: 6 V DC, 30 W halogen lamp, PHILIPS 5761
Input Power Supply Voltage
© AC 100V/120V + 10% 50/60Hz
Current consumption: 0.8A or less
Internal fuse rating: 250V, T2A
© AC 230V + 10% 50/60Hz
Current consumption: 0.4A or less
Internal fuse rating: 250V, T2A
Protection Class
© Class I
Operating Environment
© Temperature: 0 to +40°C
© Humidity: Relative humidity max. 85%, non-condensing
© Altitude: Max. 2000 m
© Pollution: Degree 2
© Installation: Category I
© Indoor use only
Conforming Standards
© Product with AC 120 V:
* UL Listed product
* FCC 15B Class A satisfied
© Product with AC 230 V:
* GS approved product
* EU Low Voltage Directive satisfied
* EU EMC Directive satisfied
@ Fine focus knob scale: 1 step equals | um
@ Amount of movement of fine focus knob: One turn moves the stage up or down by 0.1 mm
@
Amount of movement of coarse focus knob:
One turn moves the stage up or down by about 12 mm
2 mm up and 28 mm down from the reference (focused) position
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe A respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protections against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which the user will be required to correct the interference at this own expense.