PHONE SETUP:
PC
LAN
DC12
HEADSET
Installing the Phone (Wall Mount):
1. Attach the wall mount to the slot on the back o the phone.
2. Attach the phone to the wall via the wall mount hole.
3. Pull out the tab rom the handset cradle (See gure below).
4. Rotate the tab and plug it back into the slot with the extension up to hold the
handset while the phone is mounted on the wall (See gure below).
Installing the Phone (Phone Stand):
For installing the phone on the table with the phone stand, attach the phone stand
to the bottom o the phone where there is a slot or the phone stand (upper part,
bottom part).
Installing BLF Paper Label:
1. Install the paper label under the plastic notches on the phone and gently lay the
paper down on the phone surace.
2. Install the plastic cover over the paper label by inserting the cover under the
plastic notches on the phone.
3
Slots for the wall
mount and phone
stand
HANDSET
Handset rest
Tab with extension up
Tab with extension down
CONNECTING THE PHONE
PC
LAN
DC12
PC Port
LAN Port
Power Headset Port Handset Port
Cover
Label
HEADSET
HANDSET
4