Shure SLX-D Manual page 29

Using shared lists:
From the Multi­Mic Mode menu:
• Enter mode/list opens any existing frequency list on your device.
◦ Use the arrow buttons to highlight frequencies
◦ Press Enter to change the selected channel's name, adjust the audio gain, or delete the frequency from the list
◦ Add additional frequencies from the bottom of the list.
• Create list starts a group scan to identify available channels.
◦ Use the arrow buttons to select the desired group and push Enter to confirm
◦ Set the channel count to the number of transmitters in your system and push Enter to confirm
• Share list copies the list on your device to other SLXD5 receivers via IR sync.
• Delete list clears the list data stored on your device.
Setting up multiple systems:
1. Create a list on your first SLXD5 receiver (Receiver A):
1. Select Multi-Mic > Create list and push Enter.
2. After a group scan, the group with the most available channels is displayed. To choose a different group, use
the arrow buttons and push Enter to confirm.
3. Use the arrow buttons to change the channel count to match the number of systems in your setup (default is
10).
4. Push Enter to confirm, then push Exit to return to the previous menu.
2. Share the list to other SLXD5 receivers in your system:
1. On Receiver A, select Multi-Mic > Share list and push Enter.
2. Align the IR ports of Receiver A and another SLXD5, then push the sync button on Receiver A to wirelessly
share frequency lists. Repeat as needed for the receivers in your system.
3. Set receivers to the desired frequency:
1. On any SLXD5 using your shared list, select Multi-Mic > Enter mode/list and push Enter.
2. Use the arrow buttons to select the frequency you want to assign to this receiver.
3. Push Exit once to return to the previous menu, or push 3 times to return to the Home screen. Your receiver is
set to the selected frequency.
4. Sync the transmitters:
1. On any SLXD5 using your shared list, select Multi-Mic > Enter mode/list and push Enter.
2. Turn on an SLX-D transmitter.
3. Use the arrow keys on the receiver to select the channel for that transmitter.
4. Align the IR ports on the transmitter and receiver and push the sync button.
Note: All transmitters can be synced to the desired channel in your shared list from the same receiver, and pass audio to any receivers set to the
same channel.
Add or Edit Frequencies:
On any SLXD5 using your shared list, select Multi-Mic > Enter mode/list, and use the arrow buttons to select a frequen­
cy. Push the Enter button to:
• Rename the channel
• Change headphone output gain
• Delete this frequency from list
To add a new frequency, navigate to the bottom of the list and select Add Frequency. Use the arrow buttons to manually set the
frequency, and push Enter to confirm.
Shure Incorporated
29/56