Shure SLX-D Manual page 16

Multi-Mic Mode
Help
◦ RF Power: Select an RF power setting:
HH/BP:
Low = 1 mW
High = 10 mW
No change
SLXD3 PO:
Low = 1 mW
Normal = 10 mW
High = 30 mW
No change
◦ Auto Lock: Turn the transmitter auto lock On or Off
◦ Lock Type: Determine auto lock behavior:
Menu Only: Locks the menu to prevent transmitter settings from being changed
Menu & Power: Locks the menu and disables the power switch
◦ Battery Type: To ensure accurate battery metering, set the battery type to match the in­
stalled AA battery type.
Note: Menu is not selectable when Shure rechargeable batteries are installed
◦ High Pass: Turn the high pass filter On or Off
◦ Phantom: Adds phantom power for condenser microphones (SLXD3 only). Select +12V
or +48V as required by the microphone.
Tx Firmware
Update transmitter firmware using IR sync
Tx Factory Reset
Reboots the transmitter and restores all settings to factory defaults
Enter Mode/List
Enters Multi-Mic Mode and displays the existing list
◦ Select a list item and press Enter to rename, set gain, or delete that item
◦ Press the Sync button to IR sync the selected frequency to a transmitter
Create List
Initiates a group scan to determine available frequencies, creates a new list from those
frequencies
Share List
Copy the existing Multi-Mic Mode list to another SLXD5 using IR sync
Delete List
Clears all list items
Provides a QR code link to additional materials
Shure Incorporated
16/56