Navigating the Receiver Menus
The receiver has a main menu for setup and configuration and an advanced menu to access additional receiver functions. Use
the control knob to navigate menu screens and confirm selections; use the exit button to return to the previous level.
SLXD4 Menus and Configuration
Push the control knob button to access the menu, and rotate to advance to the next menu screen.
1. Frequency Setup
2. Channel Name
3. Gain
4. Mic/Line Level
5. Advanced Settings
1.1 Guided Fre-
Stepbystep instructions to initialize a new system, or to add a re
quency Setup
ceiver to an existing system
Receiver automatically scans for the best available group, if applic
able.
1.2 Group Scan
Note: Some bands consist of only a single group. RF performance is the same in
single-group bands as in bands that support multiple groups.
Receiver automatically scans for available channels within the se
1.3 Channel Scan
lected group
1.4 Manual Fre-
Manually tune the receiver to a desired frequency
quency Setup
Customize the channel name
Monitor audio levels and adjust the receiver gain
Switch between output levels
•
•
5.1 Device Lock
•
5.2 Network Con-
Switch between automatic and manual IP addressing
figuration
5.3 Controller Ac-
Block or allow third-party control access
cess
5.4 Transmitter
Apply and sync transmitter presets
Preset
5.5 Device Preset
Save current receiver settings or restore last saved settings
Unlock: Receiver is unlocked
Lock Menu: Receiver settings are locked
Lock Menu & Power: Receiver settings and power button are
locked
Shure Incorporated
13/56