Shure SLX-D Manual page 14

6. Help
SLXD5 Menus and Configuration
From the home screen, press Enter to see your menu options. Use the arrow keys to cycle through options, push Enter to con­
firm your selection, or press Exit to return to the previous screen.
Frequency
Audio Out
Channel Name
5.6 Factory Reset Restores all settings to factory defaults following a system reboot
5.7 Transmitter
Update transmitter firmware using IR sync
Firmware
5.8 About Displays firmware version and serial number
Provides a link to additional materials (http://help.shure.com/slxd4)
Channel Scan
Arrow keys change the selected group as needed, Enter automatically scans for avail­
able channels within the selected group
Group Scan
Receiver automatically scans for the group with the most available channels, if applica­
ble. Arrow keys change the group as needed, Enter accepts the selected group.
Note: Some bands consist of only a single group. RF performance is the same in single-group bands as in bands
that support multiple groups.
Manual Setup
Manually tune the receiver to a desired frequency
Audio Out
Select Balanced (Mono) for XLR devices, or Dual Mono for 3.5mm devices, and adjust
gain
Headphone
Adjust headphone gain
Mic/Line
Switch between output levels
Customize the channel name
Shure Incorporated
14/56