Charging Status LEDs
Description
Ready for Use
Charging
Error
Not charging
Dual Bay Chargers
The SBC203 dual-bay charger can charge individual batteries or batteries installed in transmitters.
1.
Plug the charger into an AC power source.
2.
Insert batteries or transmitters into the charging bay.
IMPORTANT: Insert transmitters facing forward to avoid damage.
3.
Monitor the charging status LEDs until charging is complete.
Color
Green (solid)
Red (flashing)
Yellow (quick flashing)
Off
State
Device is fully charged
Charging
Battery or power supply error
Power supply is disconnected, or no device is docked in the
charging bay
Shure Incorporated
23/56