Table of Contents
Advertisement
Damper Door
The damper door feature allows outside air into the
room. The door is secured with two screws from
the factory that must be removed upon installation
if the customer would like to use this feature. The
wing nut. The wing nut can be loosened and the rod
may be slid back which opens the door. It then can
be locked into place by tightening the wing nut.
Make Up Air Module
The make up air module feature allows outside air to
be "conditioned" before entering the room.
The module is secured with two screws and tabbed
into a base plate mounted to the base pan. Some
new zoning regulations require that incoming air be
conditioned.
accessory.
An ON/OFF switch and compressor test switch are
mounted to the front control.
– 41 –
(Continued next page)
Advertisement
Table of Contents
