BMW SEDAN 3 Series 2023 Owner's Manual page 258

CONTROLS
The system is activated automatically a few
minutes before the set departure time. The
system remains switched on for a short time
after the set departure time.
For safety reasons, the air conditioning can
only be activated once for the departure time.
The system will be available again as soon
as the drive-ready state is activated and deac-
tivated again.
Observe the information about the intended
use of the vehicle.
Additional information:
For Your Own Safety, refer to page 8.
Setting the departure time
1. "CLIMATE MENU"
2. "Settings"
3. "Pre-conditioning"
4. "Departure plan"
5. Set the departure time.
6. Select day of the week, if needed.
Activating the departure time
1. "CLIMATE MENU"
2. "Settings"
3. "Pre-conditioning"
4. "Departure plan"
5. Activate the desired departure time.
Display
In the instrument cluster:
The engine runs for the purpose
of operating the pre-condition-
ing. The vehicle is not ready to
drive.
258
Climate control
Online Edition for Part no. 01405A5F6E0 - VI/22
Icon Description
Icon in the center console
at the top.
Icon lights up: heating op-
eration is switched on.
Icon in the center console
at the top.
Icon lights up: a departure
time is activated.
Icon flashes: pre-condition-
ing is switched on.
Confirmation signals from the
vehicle
The activation of the system is confirmed by
flashing twice.
The parking lights are switched on as long as
the system is switched on.