BMW SEDAN 3 Series 2023 Owner's Manual page 219

▷ The sensor system calibration process is
complete.
▷ Cruise Control with Distance Control active.
▷ Seat belt on the driver's side fastened.
▷ Forward Collision Warning active.
▷ Pedestrian Warning active.
▷ Side Collision Warning active.
Turning Steering Assistant on/off
Assisted Driving Mode
General information
This button is used to switch the con-
figured function on and off.
The button can be used to set the pri-
marily used function.
Setting the function
When the system is active, press the
button repeatedly until the desired
function is selected in the toolbar. The
toolbar for Assisted Driving mode is displayed
at the bottom of the instrument cluster.
Icon Function
Cruise Control with Distance Control.
Cruise Control with Distance Control
and Steering Assistant.
The selected function is shown in green.
Driver assistance systems
Online Edition for Part no. 01405A5F6E0 - VI/22
Turning on the system
1. Press the button on the steering
wheel.
2. Adjust the Steering Assistant if nec-
essary.
Steering wheel icon lights up gray.
The system is on standby and does not
manipulate steering movements.
System activates automatically as soon as all
function conditions are fulfilled.
Steering wheel icon lights up green.
The system is active.
With the system switched on, the Daytime Pe-
destrian Collision Mitigation system and the
Side Collision Warning are activated.
Turning off the system
Press the button on the steering wheel.
The indicator goes out.
The system does not perform supportive
steering wheel movements.
Stopping Steering Assistant
automatically
The system interrupts the supporting steering
movements automatically, for example in the
following situations:
▷ At a speed above 130 mph/210 km/h.
▷ When the steering wheel is released.
▷ The driver applies the brakes.
▷ With strong steering intervention.
▷ When leaving own lane.
▷ When the turn signal is switched on.
▷ When the lane is too narrow.
CONTROLS
219