BMW SEDAN 3 Series 2023 Owner's Manual page 231

Functional requirements
▷ The trunk is fully closed.
▷ The camera area is clean and clear.
Deactivated rearview camera
When the rearview camera is deactivated, for
instance when the trunk is open, the camera
image is displayed with gray shading.
Automatic camera
perspective
Principle
The automatic camera perspective shows a
steering-dependent view in the respective driv-
ing direction.
This perspective adapts to the respective driv-
ing situation.
General information
As soon as obstacles are detected, the view
changes to a fixed display of the area in
front of or behind the bumper or, if necessary,
changes to side protection.
When the reverse gear is engaged, the auto-
matic camera perspective is exited if necessary
and the rearview camera view is displayed.
If necessary, select the automatic camera per-
spective when reverse gear is engaged. The
automatic camera perspective will then be
maintained for the current parking operation.
Follow the information in the "Parking assis-
tance systems" chapter.
Side protection
Principle
The side Park Distance Control is automati-
cally displayed when the automatic camera
perspective is turned on. The function shows
obstacles located next to the vehicle.
Online Edition for Part no. 01405A5F6E0 - VI/22
Parking
General information
Follow the information in the "Parking assis-
tance systems" chapter.
Display
To protect the sides of the vehicle, obstacle
markings are displayed on the sides of the ve-
hicle.
▷ No marks: no obstacles were detected.
▷ Color marks: warning against detected ob-
stacles.
System limits
The system only displays stationary obstacles
that were previously detected by sensors while
passing them.
The system does not detect whether an obsta-
cle moves later on. For this reason, at stand-
still, the marks are not shown anymore in the
display after a certain time. The area next to
the vehicle must be newly captured.
Side view
Principle
The side view helps when positioning the vehi-
cle at the curb or when other obstacles are on
the side by displaying the side surroundings.
CONTROLS
231