BMW SEDAN 3 Series 2023 Owner's Manual page 238

Table of Contents

Advertisement

CONTROLS
Malfunction
An icon is displayed on the control dis-
play.
The detection range of the sensors is
not displayed on the control display.
A Check Control message is displayed.
Park Distance Control malfunction. Have the
system checked by an authorized service cen-
ter or another qualified service center or repair
shop.
Active Park Distance Control
Principle
The Park Distance Control brake function ini-
tiates emergency braking if there is an acute
risk of collision.
General information
Due to system limits, a collision cannot be pre-
vented under all circumstances.
The function is available below walking speed
when driving in reverse or rolling backward.
Pressing the accelerator pedal interrupts the
brake intervention. No emergency braking is
performed.
After emergency braking to a stop, further
creeping toward an obstacle is possible. Pro-
ceed with caution. To move forward, lightly
press the accelerator pedal and release as
needed.
If the accelerator pedal is depressed longer,
the vehicle drives off. Manual braking is possi-
ble at any time.
Follow the information in the "Parking assis-
tance systems" chapter.
238
Parking
Online Edition for Part no. 01405A5F6E0 - VI/22
Safety information
Warning
The system cannot serve as a substitute for
the driver's personal judgment in assessing
the traffic situation. Based on the limits of
the system, it cannot independently react
to all traffic situations. There is a risk of
accident. Adjust driving style to traffic condi-
tions. Watch the surrounding traffic situation
closely, be ready to take over steering and
braking at any time, and actively intervene
where appropriate.
Sensors
The system is controlled by the following sen-
sors:
Ultrasonic sensors in the front/rear bump-
ers.
Ultrasonic sensors, side.
Turning off Active Park Distance
Control temporarily
After emergency braking, the function can be
temporarily turned off on the control display.
1.
"Obstacle detected. Emergency braking."
2.
"Deactivate temporarily"
During continued driving in this surrounding
situation, no further emergency braking will
occur.
The system will be turned on again automati-
cally for the next drive.
Settings
It is possible to set which areas on the vehicle
will be protected by the system.
1.
"MENU"
2.
"Vehicle apps"
3.
"Driving settings"

Advertisement

Table of Contents
loading

Table of Contents