Control Panel - CDA SC020 Use And Maintenance

Control panel

Operation
Operation of the oven is controlled by the oven function knob – to set a
required function you should turn the knob to the selected position, and the
temperature regulator knob – to set the temperature, turn the thermostat
control clockwise.
The oven can be switched off by setting both of these Controls to the
o
position " "/" ".

Caution! When selecting any heating function (switching a heater on etc.)
the oven will only be switched on after the temperature has been set by the
Thermostat Control.
8 | Instruction Manual
MENU
>
<
0
Select the mode of operation
Higher setting sensor
Lower setting sensor
Appliance on indicator
Kitchen timer
Duration