Control Panel; Operation - CDA SC035 Use And Maintenance

Control panel

Operation

Operation of the oven is controlled by the oven function knob – to set a
required function you should turn the knob to the selected position, and the
temperature regulator knob – to set a required function you should turn the
knob to the selected position.
The oven can be switched off by setting both of these Controls to the
position " "/" ". o

Caution! When selecting any heating function (switching a heater on etc.)
the oven will only be switched on after the temperature has been set by the
Thermostat Control.
8 | Instruction Manual
MENU
>
<
0
Select the mode of operation
Higher setting sensor
Lower setting sensor
Appliance on indicator
Kitchen timer
Duration