User Preference Settings - Fisher & Paykel DishDrawer DD60 Series Service Manual

DD*F & DD*I MODELS ONLY:

5.5 User Preference Settings

How to change the setting of an option
1 CHECK
Check that there is no wash in progress, then open the drawer.
2 ENTER MENU
To enter the menu: Press and hold the
You are now in the Rinse aid option of the preference options menu.
To change the Rinse aid setting, go to step 4 now.
3 SCROLL TO OPTION
Press to scroll to the next option. The wash modifier indicators will display which option is selected
(see table below).
When you have scrolled to the end of the sequence, the menu will start again with Rinse aid.
4 CHANGE SETTING
Press to change the setting within an option.
The wash program indicators will display which setting is selected (see table below).
5 SAVE SETTING & QUIT MENU
Press . This will save the new setting and quit the preference options menu.
Note: If at any time, you want to exit the menu, press and hold
Double models only:
You can use either drawer to change the settings.
Changing the settings in one tub will set your preferences for the whole dishwasher.
OPTION RINSE AID
Which option
am I in?
Possible 0 to 5 (max)
settings
Example
Adjusting the Knock Sensitivity on Integrated Models
NOTE:
It is important to ensure the knock sensor is correctly fitted in the right orintation and
secured correctly to the rear of the intergrated door panel to ensure it operates correctly.
This knock sensor can be adjusted if it is not pausing correctly, or is too sensitive, and adjustment
level is found in the user preference settings, but this feature is hidden to the customer.
1
To adjust, get into the user preference menu as shown above.
2
While in the user preference settings, hold both the START and MODIFIER buttons until the qUICk
and SANITIZE LED's are lit.
3
The knock sensor level is shown as a bar graph on the wash cycle LED's. (4 is the factory setting).
4
To adjust the sensitivity, use the >>CYCLE button, then to save the setting press the START button,
and the product will save and return to the idle display.
This process is highlighted on the following pages:
5 OPERATION
and
WATER SOFTENER
(SOME MODELS ONLY)
0 to 5 (max)
4 indicators lit = setting 4
1 indicator lit = setting 1
together for four seconds.
to cancel (
OPEN DRAWER
AUTO POWER-ON
(SUITABLE AS A
SABBATH OPTION)
On or Off
On
Off
).
TONES
CLOSED DRAWER
AT END
AUTOLOCK
OF WASH
On or Off On or Off
34