Table of Contents
Advertisement
2019/05/15 01:58:50 (GMT+09:00)
Deciding Measured Values
1.
Make decision of measured values using "AirLeak_CheckTool.exe".
Enter each measured value in indicated locations of the window.
Enter the value measured by the
air leak tester after 60 seconds.
Enter the value measured
by the unit after 60 seconds.
2.
After each value has been entered, click "Judge!" button, then decision result is displayed in the window shown below.
Enter the value measured by
the air leak tester after 120 seconds.
Enter the value measured by
the unit after 120 seconds.
Sony CONFIDENTIAL
For Authorized Servicer
30
SYS SET
Advertisement
Chapters
Table of Contents
