Advertisement
Use Auto Find to automatically
search and try all possible
brand codes
Turn on the device you want the remote to controL.
Press and how PRG until the indicator
tight turns on, then
release PRG.
Pressthe key for the device you are trying to program
(CABLE,VCR,AUX, TV).
Press 0-0-0 (zero-zero-zero),
then press ENTER right away.
Aim the remote at the correct device and push the POWER
key (The indicator
tight wilt turn off white the POWERkey is
pressed). ALLow a second to pass, then push the POWERkey
again. Repeat until the device turns off.
Push ENTERto save the code (The indicator
tight wilt flash 3
times and then turn off),
Press POWERto turn the device back on.
You con quickly get out o/ Auto Find by pressing PR6.
If the indicator
light stays
on while you press Power instead
off turn-
ing off, all the codes have been tried ond your device can't be con-
trolled.
AUTO FIND
Another way of finding
a brand code for controtting auxitiary equipment such as a VCR, DVD prayer, etc. that is not
avaitabte through the regutar remote brand code programming
method.
PAGE
48
2o_,-_504
Advertisement
