Advertisement
Control the volume on your home audio system without
changing
modes
D
Find the code that operates your amplifier.
Test it to
make sure it's the correct one by following
the procedure
in "Programming
Your Remote", on page 45.
Program your audio system
into one of the available
AUX
modes: Aux, Aux+l,
Aux+2, or Aux+3.
Pressand how PRGon your remote until the indicator
tight stays lit, then release.
Press 4-9-9;
then ENTER on the remote.
The indicator
tight will flash three times the code was accepted.
Audio system volume/mute
now appears in all modes.
Note: You can also program CaNe Box Volume and Mute
control (if available) into your cane box mode (CABLE or
AUX mode) by repeating the steps for programming
on
the previous page but entering
3-9-9, instead of a brand
code, then pressing ENTER.
To put everything back to normal, reprogram the mode ]:ram Step
3 with the original
brand code.
I]:you can't ffind the code ]:or your ampl_'er,
use the Auto Find
]:eature on page 48.
AMPLIFIER
Audio device which sends sound to speakers, tike an Audio Tuner, Receiver, or Amptifier.
See Audio Tuners/Amp list on page 50.
CABLE BOX VOLUME/MUTE
Some cane boxes have volume controLs.
P A G E 4 6
2o_,-_s_4-o
Advertisement
