Advertisement
Control up to seven different
devices with your remote
Refer to the chart on page 49/50 to find the type and brand
name of the device you're programming.
Press and how PRGuntil the indicator
tight turns on, then
release PRG.
Press AUX and the i on the NUMBER keypad at the same
time (for AUX +1).
Using the NUMBER keypad, enter the three-number
code for
the device you've selected.
Press ENTERto save the code.
With the device turned on, point the remote at it and press
POWER. I t should turn off.
Repeat the steps for AUX+2, and AUX+3.
Programming your Zenith remote may allow you to use one remote to
work up to 7 different
products or devices.
Some devices may not work with your Zenith remote control.
AUX
Auxiliary equipment.
Can be any equipment which does not have a dedicated
key on your remote like Cable or VCR.
Typically a second VCR, stereo system, audio tape deck, etc.
2o6-B5_4
PA G E 4 7
Advertisement
