Advertisement
Card slot
MONITOR OUT
Dimensions ( W × H × D )
Including TV Stand
TV Set Only
Weight
Note:
Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.
2005 Matsushita Electric Industrial Co., Ltd. All rights reserved.
Unauthorized copying and distribution is a violation of law.
1. Safety Precautions
1.1. General Guidelines
1. When servicing, observe the original lead dress. If a short circuit
is found, replace all parts which have been overheated or
damaged by the short circuit.
2. After servicing, see to it that all the protective devices such as
insulation barriers, insulation papers shields are properly
installed.
3. After servicing, make the following leakage current checks to
prevent the customer from being exposed to shock hazards.
1.1.1. Leakage Current Cold Check
1. Unplug the AC cord and connect a jumper between the two
prongs on the plug.
2. Measure the resistance value, with an ohmmeter, between the
jumpered AC plug and each exposed metallic cabinet part on the
equipment such as screwheads, connectors, control shafts, etc.
When the exposed metallic part has a return path to the chassis,
SD CARD slot × 1, PC CARD slot × 1
VIDEO (RCA PIN Type) 1.0 Vp-p (75
AUDIO L-R (RCA PIN Type × 2) 0.5 Vrms
724 mm × 549 mm × 300 mm (TX-26LX500)
857 mm × 624 mm × 300 mm (TX-32LX500)
724 mm × 487 mm × 141 mm (TX-26LX500)
857 mm × 563 mm × 141 mm (TX-32LX500)
20.5 kg Net (TX-26LX500)
22.5 kg Net (TX-32LX500)
)
3
Advertisement
