Panasonic TX-32LX500M Service Manual page 19

7.11. Removing G-Board bracket (G-Board and GP-Board)
1. Remove the rear AV bracket (See 7.4.) and the rear metal frames.
(See 7.5.)
2. Remove the fixing screws (2pcs ) and pull out the rear AV bracket
slightly.
3. Disconnect the flexible cable (GP10) and the couplers (G1, G4, G5,
G10, G11 and GP6).
4. Remove a screw on the DG-Board and release the earth lug from
the DG-Board.
5. Release the cables from the cable holders of the G-Board bracket.
6. Remove the G-Board bracket with the G-Board and GP-Board.
7.12. Removing the G-Board and GP-Board
1. Remove the G-Board bracket. (See 7.11.)
<Removing the G-Board>
2. Push the hooks (7 points) to release the G-Board from the G-
Board bracket.
3. Remove the G-Board.
19