Advertisement
2. Remove the fixing screws (11pcs ).
3. Remove the LCD panel and LCD panel holders (right and left).
4. Remove the screw (4pcs ).
5. Remove the LCD panel holders (top and bottom).
8. Service Mode Function
MPU controls the functions switching for each IICs through IIC bus in this chassis. The
following setting and adjustment can be adjusted by remote control in Service Mode.
8.1. How to enter SERVICE 1
1. In main menu, move to choose sound menu, set BASS to
MAXIMUM, and set TREBLE to MINIMUM.
2. Simultaneously press INDEX button on remote control and DOWN
button [
] on the TV set.
8.2. How to enter SERVICE 2
1. Enter the SERVICE 1 mode and press RED button into the end of
SERVICE 1 mode.
2. Select the SD Auto Check.
3. Set the channel to CH99.
4. Press HOLD button on remote control.
Note:
To exit from Service mode, press N or Power button on remote
control.
23
Advertisement
