TH-103VX200W
Note
• The felts are parts which cannot be recycled. Please use
the new article when you exchange the Cabinet.
9.36. Removal of Plasma Display
Panel
The C1 (upper, lower), C2 (upper, lower), C3 (upper, lower),
C4 (upper, lower), C5 (upper, lower), C6 (upper, lower), SS,
SS2, SS3, SC, SU, SM, SD Boards, and flexible cables
between D-C Boards and D-SC Boards, are connected with
the Plasma Display Panel for the repair.
1. Remove the Rear Covers.
(Refer to Removal of Rear Cover)
2. Disconnect the connectors (A22, P34).
3. Remove 2 screws ( ).
4. Remove 2 screws ( ) and then slide the Side Power Unit
upward.
5. Remove the Side Power Unit.
6. Remove 24 screws and then remove Cabinet Block.
7. Pull the bottom of the Cabinet Block forward and lift.
8. Remove the Cabinet Block.
44