9.18. Removal of SS2-Board
1. Remove the Side Angle (L).
(Refer to Removal of the Side Angle (L))
2. Remove 4 screws ( ).
3. Remove 2 screws ( ) and then remove the Reinforce-
ment Angle (upper_left).
4. Disconnect the connectors (SS34, SS35).
5. Remove the flexible cables from the connectors (SS51,
SS52, SS53, SS54).
6. Remove 6 screws and then remove SS2-Board.
9.19. Removal of SS3-Board
1. Remove the Side Angle (L).
(Refer to Removal of the Side Angle (L))
2. Remove 4 screws ( ).
3. Remove 2 screws ( ) and then remove the Reinforce-
ment Angle (lower_left).
4. Disconnect the connectors (SS32, SS33).
5. Remove the flexible cables from the connectors (SS59,
SS60, SS61, SS62).
6. Remove 6 screws and then remove SS3-Board.
33
TH-103VX200W