Table of Contents
Advertisement
4. Remove 3 Hooks and then remove the Power Button and
Power Button Spring.
5. Disconnect the connector (V11) and then remove V1-
Board.
6. Disconnect the connector (V22) and then remove V2-
Board.
7. Remove 2 hooks and then remove the 5 Key Button from
V2-Board.
8. Remove each 2 screws (E) and then remove the V-Board
from the Emitter Fixing Spring.
9. Disconnect the connectors (v1).
9.20.3. Removal of Cabinet Assy
1. Remove the Front Glass.
(Refer to Removal of Front Glass)
2. Remove V1-Board and V2-Board.
(Refer to Removal of V1-Board and V2-Board)
3. Remove the LED Panel and Remote Sensor Panel and
then remove the Cabinet Assy.
9.21. Removal of Plasma Display
Panel
The C1,C2,C3 Boards are connected with the plasma dis-
play panel for the repair.
1. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
2. Disconnect the connectors (A11, A22).
3. Remove 18 screws.
4. Pull the bottom of the Cabinet Block forward and lift.
5. Disconnect the Fan Relay Connectors.
27
TH-65VX300ER
Advertisement
Table of Contents
