Removal Of Plasma Display Panel - Panasonic TH-50PF50E Service Manual

TH-50PF50E
3. Remove the LED Panel and Photo IC Receive Panel and
Remote Sensor Panel.
4. Remove the Rear Cover Hook (Left, Right).
5. Remove the Fixed Angle (upper-front).
6. Remove the Cabinet Assy.
8.17. Removal of Plasma Display
Panel
• The C1, C2, C3 Boards are connected with the plasma
display panel for the repair.
• About the enclosed thing for line processing of the
plasma display panel for repair
Although two kinds of enclosed things for line processing are
contained in the plasma display for repair for this unit, in this
unit, please use the enclosed thing of a white tape and per-
form line processing.
(The enclosed thing of double sided tape is not used)
1. Disconnect the connectors (P2, P9, P11, P16, P25, P34,
P35).
2. Remove 7 screws and then remove P-Board.
3. Disconnect the connectors (A5, A11, A13, A22).
4. Remove the flexible cables from the connectors (A1, A20,
A31, C31).
5. Remove 2 screws ( ).
6. Remove 2 screws ( ) and then remove the A-Board
Block.
7. Remove the flexible cables from the connectors (C33,
SS53, SS54, SS56).
26