KitchenAid KEBS276X Use And Care Manual page 26

Starting the automatic
self-clean cycle:
1.
2.
26
Follow steps under "Before
starting a self-clean cycle" on
page 25.
Make sure that the electronic
clock is set to the correct time of
day. If not, reset following the
instructions on page 8.
. Set the Selector to CLEAN. Turn
the Temperature Control fully
clockwise to CLEAN.
. Lift the Lock Lever Cover Panel
between the oven door and the
control panel. Slide the Oven
Lock Lever all the way to the
right. You will hear a tone and
"START TIME" will appear in the
display. The lower oven Lock
Lever is located between the
oven doors.
Clock Timer
9 A
Set Start
Stop/Cancel
. Touch the Start Button to set the
present time of day as the start
time. "STOP TIME" and the actual
cleaning time, 21/5 hours from
the present time of day, will
appear in the display.
Clock Timer
O i
Set Start Stop/Cancel
. Touch the Start Button to set the
automatically selected stop time
and return the clock to the
present time of day. "AUTO" will
appear in the display. The Clean
Indicator Light will glow, and the
cleaning cycle will begin. No end
of cycle tone will be given.
. At the end of the Self-Clean cycle,
the Clean Indicator Light and
"AUTO" will go out.
Delaying the automatic
self-clean cycle:
The start of the Self-Clean cycle can
be postponed to a more convenient
time, if desired. The controls may be
set to delay the Self-Clean cycle for
up to 12 hours.
] . Follow steps 1, 2, 3 and 4 under
"Starting the automatic self-clean
cycle."
. Turn the Set Knob until the
desired new start time appears in
the display.
. Touch the Start Button to set the
new start time. "STOP TIME" and
the actual cleaning stop time,
2-1/2 hours from the present
time of day, will appear in the
display.
. Touch the Start Button to set the
stop time and return the clock to
the present time of day. "AUTO"
will flash in the display until the
Self-Clean cycle begins. Once the
Cycle is in progress, "AUTO" will
appear continuously. No end-of-
cycle tone will be given.