Table of Contents
Advertisement
Extending the automatic
self-clean cycle:
If your oven is excessively dirty and
requires longer cleaning time, the
Automatic Self-Clean cycle can be
extended for up to 4 hours.
1. Follow steps 1,2,3 and 4 under
"Starting the automatic self-clean
Cycle."
2. When "STOP TIME" appears in
the display, turn the Set Knob
clockwise until the desired length
of cleaning time is displayed.
Remember, you will be adding
time to the normal 2-1/2 hour
cleaning time.
IMPORTANT: A self-cleaning
time longer than 4 hours cannot
be selected.
3. Touch the Start Button to set the
new stop time and return the
clock to the present time of day.
4. "AUTO" will appear in the display
and the Self-Clean cycle will
begin. No end-of-cycle tone will
be given.
Combining the delayed and
extended self-clean cycle options:
An Automatic Self-Clean cycle can
be both delayed and extended, if
desired.
1. Follow steps 1,2,3 and 4 under
"Starting the automatic self-clean
Cycle."
2. Set the delayed start time by
turning the Set Knob until the
new start time appears in the
display. Touch the Start Button to
set the new start time.
3. Follow steps 2 and 3 under
"Extending the automatic
self-clean cycle" above.
4. "AUTO" will flash in the display
until the Self-Clean cycle begins.
Once the cycle is in progress,
"AUTO" will appear continuously.
No end-of-cycle tone will be
given.
To stop the self-clean cycle
at any time:
1. Touch the Stop/Cancel Button
twice. A tone will sound each
time and the clock will return to
the present time of day.
2. Slide the Oven Lock Lever all the
way to the left.
IMPORTANT:
If the Lock
Indicator Light has come on,
wait until the oven cools and the
light goes off before sliding the
Lock Lever back to the left. Do
not force it. W/ait until it
moves easily.
3. Turn the Selector to OFF and the
Temperature Control fully
counterclockwise.
To return oven to regular use
after a self-clean cycle:
1. Slide the Oven Lock Lever all the
way to the left.
2. Turn the Selector to OFF and the
Temperature Control fully
counterclockwise.
3. Allow oven to cool sufficiently
before wiping up any residue.
W/hat happens during the
self-clean cycle:
The oven not being cleaned will
not heat even though the controls
are set.
After the controls have been set
for a non-delayed cycle, or after the
delayed time has elapsed on a
delayed cycle:
e The Oven Cycle Light will glow to
tell you the oven is ON.
e The Clean Indicator Light will
glow to tell you the oven is slowly
heating to the clean temperature,
and "AUTO" will appear
continuously in the display.
* The Lock Indicator Light will come
on when the temperature reaches
575°F-600°F (approximately
1 5 minutes].
Continued on next page
27
Advertisement
Table of Contents
