Related Manuals for ViewSonic PJ751
Summary of Contents for ViewSonic PJ751
-
Page 1: Lcd Projector
PJ751 User Guide Guide de l’utilisateur Bedlenungsanleltung Guía del usuario Guida Dell’utente Användarhandbok Käyttöopas 使用者指南 使用者指南 Руководство пользователя Image Size 31” – 300” LCD Projector... -
Page 2: Table Of Contents
Temporarily Blanking the Screen ...20 Using the Menu Functions ...21 Operating the PC Screen ...22 OSD MENU FUNCTION DESCRIPTION Main Menu ...23 Picture 1 Menu ...24 Picture 2 Menu ...24 Input Menu ...25 Screen Menu ...26 Option Menu ...28 ViewSonic PJ751... - Page 3 On-Screen Messages ...33 Problem Diagnostics ...34 SPECIFICATIONS Outline Dimensions ...35 Customer Support ...36 LIMITED WARRANTY ViewSonic Projector ...37 Appendix Power Cord Safety Guidelines ...38 Compliance Information for U.S.A..40 Compliance Information for Canada ...40 Compliance Information for European Countries ...40 User Information for All Countries ...40...
-
Page 4: For Your Records
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo. airsync, and OnView are registered trademarks of ViewSonic Cor- poration. VESA and SVGA are registered trademarks of the Video Electronics Standards Association. -
Page 5: Features
1 High brightness for clear images in any settings 2 Whisper mode for quiet operation and extended lamp life 3 Magnification feature allows selected parts of the screen to be magnified for closer viewing 4 “My Screen” feature creates a customized start-up screen ViewSonic PJ751... -
Page 6: Before Use
BEFORE USE Package Contents Make sure all of the following items are included in the package. If anything is missing, please con- tact ViewSonic Corp. NOTE: Keep the original packing material for future shipment. Projector Power Cord (China) Quick Start Guide... -
Page 7: Component Names
Terminal VIDEO IN Terminal AUDIO IN R Terminal AUDIO IN L Terminal AUDIO IN 1 Terminal AUDIO IN 2 Terminal AUDIO OUT Terminal ViewSonic PJ751 Speaker Foot Adjuster FRONT/LEFT VIEW OF THE PROJECTOR REAR/RIGHT VIEW OF THE PROJECTOR TERMINAL PANEL... -
Page 8: Remote Control
• Do not attempt to disassemble the remote control device. REMOTE CONTROL DEVICE BLANK Button LASER Button RGB Button MOUSE/RIGHT Button Used to click the right mouse button. KEYSTONE Button RESET Button Used to click the right mouse button. FREEZE Button MUTE Button VOLUME Button ViewSonic PJ751... -
Page 9: Inserting The Batteries
3 Fix the other end of the strap to the other handle hook in the same way. CAUTION Be sure that the strap is secure befor attempting to lift the projector by its handle. Dropping the pro- jector may result in damage to the unit or electrical shock. ViewSonic PJ751... -
Page 10: Installation
• Do not release the foot adjuster button unless you are holding the projector securely. a [inches (m)] Max. 82 (2.1) 123 (3.1) 164 (4.2) 205 (5.2) 246 (6.3) 308 (7.8) 411 (10.4) Press the foot adjuster button Top View Side View Rear Foot Adjuster ViewSonic PJ751... -
Page 11: Ports And Cables
Audio input AUDIO IN L (from video equipment) AUDIO IN R Audio output AUDIO OUT ViewSonic PJ751 Terminal Accessory or optional RGB cable with D- sub 15-pin shrink jack and inch thread screws. Optional audio cable with stereo mini- jack... -
Page 12: Power Connection
If the power cord is not compatible with the local AC outlet standard, contact your local dealer or ViewSonic Corp to obtain the correct power cord.. Connect the AC inlet of the projector firmly to the power outlet with the power cord. -
Page 13: Connecting To A Computer
• Some computers may have multiple display screen modes. The use of some of these modes may not be possible with this projector. • For some RGB input modes, the optional Mac adapter is necessary. ViewSonic PJ751 USB cable If connecting to a... -
Page 14: Connecting To A Dvd Player Or Vcr
Connecting to a DVD Player or VCR If using a component video connection If using a S-video connection If using an audio/video connection DVD player S-VIDEO cable If using a S-video connection S-VIDEO cable ViewSonic PJ751... -
Page 15: Connecting To A Display Monitor
Connecting to a Display Monitor Display monitor ViewSonic PJ751... -
Page 16: Operation
• To prevent any trouble, turn the projector on/off when the computer or video tape recorder is OFF. Providing a RS-232C cable is connected, turn on the computer before switching on the pro- jector. STANDBY/ON Button ZOOM Knob FOCUS Ring Lens cap ViewSonic PJ751... -
Page 17: Selecting An Input Signal
Adjusting Image Size and Focus Use the zoom ring to adjust the screen size Use the focus ring to focus the picture ViewSonic PJ751 Using the projector's control panel Press the INPUT button As illustrated below, each time you press the INPUT button, the projector switches between its input signal ports. -
Page 18: Adjusting The Volume
Press the VOLUME button to close the dialog box. (Even if you don't do anything, the dialog box will automatically disappear after a few seconds.) 2 Press the MUTE button once again to restore the sound. ViewSonic PJ751... -
Page 19: Adjusting The Image Position
Press the POSITION button again to close the dialog box and com- plete this operation. (If no activity is detected, the dialog will automat- ically disappear after a few seconds.) This function is only available for RGB IN 1/2 input. Control Panel ViewSonic PJ751... -
Page 20: Using The Automatic Adjustment Feature
The input signal with best quality will be selected automatically. This feature is available only if VIDEO is set to AUTO in the INPUT menu. NOTE: • The automatic adjustment operation requires approximately 10 seconds. Certain input signals may not function properly during this adjustment. ViewSonic PJ751... -
Page 21: Correcting Keystroke Distortions
• This function may not work well with some input signal types. • The adjustment range for keystone distortion correction varys with input signal type. ViewSonic PJ751 buttons to select the direction of distortion to buttons to correct the distortion... -
Page 22: Using The Magnify Feature
Press appears as the projector exits ViewSonic PJ751... -
Page 23: Signal Searching
The input signal screen is shut off, and a blank screen appears. You can set the blank screen using the menu (from the SCREEN menu, select BLANK). Press the BLANK button again to remove the blank screen, and return to the input signal screen. ViewSonic PJ751 RGB IN 1 COMPONENT VIDEO 16:9... -
Page 24: Using The Menu Functions
ESC button to return to the previous display. [ex. Adjusting SHARPNESS] Use the buttons to adjust the SHARPNESS. buttons. The current set- buttons, then press the buttons to select PIC- buttons, then press or ENTER button again to or the ENTER button. ViewSonic PJ751 or the... -
Page 25: Operating The Pc Screen
• This function is not available while the lamp is warming up (the POWER indicator flashes green), while adjusting the volume and display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or for displaying the menu. ViewSonic PJ751 Remote Control Operation button... -
Page 26: Osd Menu Function Description
Press the MENU button, or do not perform any operation for several seconds. Description Dark Weak 16:9 16:9 SMALL CENTER CINEMA FRANÇAIS ITALIANO JAPANESE KOREAN button, and press the button, and press the button. (For Example: MAIN Menu (BRIGHT) BOTTOM DYNAMIC DEUTSCH NORSK POTUGUÊS ViewSonic PJ751 NED-... -
Page 27: Picture 1 Menu
In such a case, initialize H SIZE with the RESET button. OVER SCAN Select Over-scan Ratio (for VIDEO/S-VIDEO/COMPONENT VIDEO): LARGE It is recommended to select SMALL to avoid flicker at the lower part of the picture. ViewSonic PJ751 Description Light Light Light Description... -
Page 28: Input Menu
In the SYNC ON G mode, the picture may be distorted with certain input signals. In such cases, remove the signal connector so that no signal is received and turn SYNC ON G off, and then reconnect the signal. Description NTSC NTSC4.43 M-PAL 1035i TURN OFF Example: INPUT Menu (AUTO) SECAM N-PAL ViewSonic PJ751... - Page 29 ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s). TURN OFF: A non-patterned (plain) blue color screen. The MyScreen and the ORIGINAL Screen will each change to the BLANK Screen sev- eral minutes after being displayed. ViewSonic PJ751 Description ORIGINAL ORIGINAL TURN OFF...
- Page 30 FULL MyScreen Lock Invalidation of MyScreen registration function: TURN ON TURN OFF When TURN ON is selected, the MyScreen category (see this Table, above) cannot be executed. In this way, one can prohibit rewrites (“writeovers”) of the MyScreen. ViewSonic PJ751...
-
Page 31: Option Menu
The message functions will not operate properly if the filter time is not reset correctly. • Before cleaning or replacing the filter, carefully read the descriptions titled "THE AIR FILTER”. ViewSonic PJ751 Description Short (Min. 1 min.) WHISPER button. -
Page 32: Maintenance
MAINTENANCE Lamp To order a new lamp unit (Lamp Part # PRJ-RLC-001), contact ViewSonic or your dealer. For the lamp part number, see the Optional Parts in the Specifications in this guide. For contact information, see the Customer Support table in this guide. Before replacing the lamp, turn the Power Switch OFF, remove the power cord from the power outlet, then wait approximately 45 minutes until the lamp has cooled. -
Page 33: Replacing The Lamp
• Do not turn on with lamp cover removed. • Do not reset the lamp timer without replacing the lamp. Always reset the lamp timer when the lamp is replaced. ViewSonic PJ751 6 Install the new lamp then tighten the two screws firmly. Also steadily push the oppo- site side of the screwed lamp assembly into the cavity. -
Page 34: Caring For The Air Filter
2 To clean a reusable filter, carefully vacuum both sides of the filter area. 3 If the filter is damaged and needs to be replaced, contact your dealer or ViewSonic Corp. Replace the old filter then put the grill back in place. -
Page 35: Caring For The Inside Of The Projector
• Gently wipe with a soft cloth. If dirt and stains etc. are not easily removed, use a soft cloth damp- ened with water, or water and a neutral detergent, and wipe dry with a soft, dry cloth. ViewSonic PJ751... -
Page 36: Troubleshooting
20 minutes. After hav- ing confirmed the following items, then please reset the power to ON. • Is there blockage of the air filter? • Is the air filter dirty? • Does the ambient temperature exceeds 35°C ViewSonic PJ751... -
Page 37: Problem Diagnostics
When the interior becomes overheated, power to the unit automatically shuts down. Press the main switch on the side of the unit to the off position then wait 20 minutes to allow the unit to cool down before any work is done to the unit. ViewSonic PJ751 defect Turn on the main power. -
Page 38: Specifications
VIDEO port VIDEO IN ...1 S-VIDEO IN ...1 Lamp: PRJ-RLC-001 ViewSonic offers other accesories including items such as air filters, remote controls, ceiling mounting brackets, manuals, soft cases, etc. Please contact your dealer or ViewSonic for information. COMPONENT VIDEO (Y, CB/PB,CR/PR) ...1... -
Page 39: Customer Support
Customer Support For technical support or product service, see the table below or contact your reseller. When calling ViewSonic Customer Support please have the product's model name and serial number on hand. Country/Region United States Canada United Kingdom Europe, Middle East, Baltic... -
Page 40: Limited Warranty
How long the warranty is effective: ViewSonic projectors are warranted for two (2) years for all parts excluding the lamp, two (2) years for all labor, and ninety (90) days for the lamp from the date of the first consumer purchase. -
Page 41: Appendix
CSA Labeled. For units which are mounted on a desk or table, type SVT or SJT cord sets may be used. For units which sit on the floor, only SJT type cord sets may be used. The cord set must be ViewSonic PJ751 Switzerland... - Page 42 If you have any questions concerning which proper power cord to use, please consult with the dealer from whom you have purchased the product. Figure A2 Maximum Current Rating of Unit 10 Amps 12 Amps 12 Amps 10 Amps 12 Amps ViewSonic PJ751...
-
Page 43: Compliance Information For U.s.a
92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.” User Information for All Countries NOTICE: Use the cables which are included with the projector or specified. ViewSonic PJ751... - Page 44 ViewSonic Corporation...