Tone, Flash And Pause/Redial Buttons - Panasonic KX-F1600 Operating Instructions Manual

TONE, FLASH and PAUSE/REDIAL buttons —
TONE button
The TONE (X) button is used for a rotary pulse dial service FLASH
and allows you to temporarily change from pulse to tone
mode during a dialing operation.
When you hang up, the unit will automatically return to
pulse mode.
Using the FLASH button
The FLASH button functions as the hookswitch on a
regular phone. If you misdial or dial another phone
number, press the FLASH button firmly.
The FLASH button also allows you to use special features PAUSE/REDIAL
of a host exchange (if connected) or local telephone
company services such as call waiting. For further details,
oTONE, FLASH and PAUSE can be stored
into a phone number for automatic
dialing.
Entering pauses
If the PAUSE/REDIAL button is pressed during dialing, å pause will be inserted.
Example-1: When your unit is connected to a host exchange, insert a pause to get an outside line.
Line access code
Example-2: If transmission errors occur when making an overseas transmission, add two pauses at the end
of the phone number.
International Country Phone
Redialing the last number dialed
If the PAUSE/REDIAL button is pressed immediately after the dial tone is obtained, the last number dialed will
be redialed.
1. Lift the handset or press (SP-PHONE).
2. Press |PAUSE/REDIAL |.
olf the line is busy when using the speakerphone, the unit will automatically redial the number up to 14
times.
30