Table of Contents
Advertisement
Editing a Tape
'Yo edit from a VCR equipped with CONTROL S (EDIT) output
Only the particular scenes preset on the playback VCR will
be edited (automatic assemble editing). Recording
start/stop on the SL-HF870D can be activated in
synchronization with playback start/stop on the playback
VCR.
as
Signal flow
wt=5 Video and audio connection
to CONTROL S IN
5
RK-G69 (optional)
oC
pm
to LINE IN 1 or 2
VIDEO/AUDIO
to LINE OUT
1or2
to CONTROL S OUT (EDIT)
SL-HF870D
(for editing)
Sony VCR with the
automatic assemble
editing function.
{for playback)
EDIT switch
~~ EDIT
Set the switches and controls
as in the illustration on page 31
Preset the desired scenes by the
automatic assemble
editing
operation
To start editing, set the SL-HF870D in recording pause
*The optional RM-E100/E100V video editing controller
mode and then follow the instruction manual of the
allows easier editing between two VCR's.
playback VCR for automatic assemble editing.
Use of the CONTROL S IN, Jack
If this jack is connected to the CONTROL(S)
OUT jack of
a Sony color TV or TV tuner, this VCR can be controlled
by pointing the supplied RMT-160 Remote Commander
toward the remote sensor on the color TV or TV tuner.
Sony color TV
KV-20XBR/25XBR, etc.
SL-HF870D
to CONTROL S IN
32
Advertisement
Table of Contents
