Table of Contents
Advertisement
Editing a Tape
Operation
SL-HF870D
VGR for editing
1 Turn on the VCR's. Insert a recorded cassette in the
SL-HF870D and a cassette for recording in the other
VCR.
2 Set the VCR for editing to recording pause mode.
3 Locate the portion of the tape at which you want to
start editing and press II / BK PAUSE/STILL (playback
Pause mode).
4 Press SYNCHRO EDIT. The indicator above the button
will light. Recording and playback will begin
simultaneously on the respective VCR's.
When SYNCHRO
EDIT is pressed and the indicator above
the button is lit, the video circuit is switched to editing
mode. In this mode, better editing will result.
Do not press any button on the VCR's or on the Remote
Commander during editing, as synchro editing will
malfunction.
30
To stop editing momentarily
Press SYNCHRO EDIT again. The indicator above the
button will go off. The SL-HF870D will enter playback
pause mode, and the VCR for editing will enter recording
pause mode.
(The pause mode will be automatically released after about
8 minutes and the tape will stop on the VCR for editing
and playback will resume on the SL-HF870D.)
To start editing of the next scene
Repeat steps 3 and 4.
To stop the tapes
Press the @
STOP button on each VCR.
Advertisement
Table of Contents
