Table of Contents
Advertisement
Other Blocks
easier:
LCL. MID! Block
LCL. (LOCAL) MIDI is used when changing tones in real time using MIDI equipment.
it is not intended for rewriting the data in the preset/user memory, but it temporarily changes only the tones based on the data in
memory.
yusi6uy
i)
=
—-
5
Parameters
?
eee
Meanings.
See
|
ry
control no. 1-4
Enter the MIDI contro! change number. Available values are off, 0-120 or Key velocity,
=
Channel key pressure and Note number.
<4
es
7
8
parameter block 1-4
Select the signal processing block controlled by the number you enter in "control
o
no.1-4".
|
S
:
a
parameter name 1-4
Select the parameter controlled by the number you enter in "control no.1-4''.
Applications for LCL. MIDI
LCL. MIDI is a pioneering function that allows real time control of the internal parameters by means of external MIDI information
such as control change number 0 — 120, key velocity, channel key pressure and note numbers, etc.
Moreover it enables simultaneous setting of up to 4 parameters on a memory basis. All the internal parameters besides "time
scale" are controllable.
<Sampie Application >
The DPS-R7 is connected with a synthesizer.
INPUT
PRE-EFFECT
REVERB
_—s«#POST-EFFECT
OUTPUT:
adjustment of the exciter level.
@ Note number controls the reverberation level. Playing
on a higher key enables larger volume of the
@® Volume (controller no.7) controls At level. A foot.
reverberating sound.
volume connected to the synthesizer controls the effect
volume directly.
PARAMETERS OF EACH BLOCK
3 9
Advertisement
Table of Contents
