Table of Contents
Advertisement
6. Turn the dial and set the memory protection if
User Memory List
necessary.
Name
Algorithm
Description
Wie U256=HLR «-3 [
he
mm!
|
If the memory protection is required, display '' wQ " indication
HYPER STADIUM
|
7. Press the ENTER button.
&
HLR mQ [
HYPER STADIUM
|
Jan 21
Indication changes to fi # .
(JAWS)
$199j)3
pabueyg
oy,
Gujaes
When the effect is saved, " #%" changes to " # #". If there
is not enough user memory remaining, the effect you have
created may not be saved. You will see the message,
"Memory full! need xxx byte more."'. In this case, you have to
delete unnecessary memory (see the Memory block on page
41) so that the remaining memory area will be empty enough
J
to save the effect. If the effect is saved, "completed" is
indicated and the SAVE mode is disengaged automatically to
the LOAD mode.
What is memory protection?
Memory protection prevents the effect you have saved from
being deleted by overwriting. The protected memory number
cannot be used for overwriting unless you release the
protection in the Memory block.
OPERATION
4 9
Advertisement
Table of Contents
