Sony DPS-R7 Operating Instructions Manual page 27

To be continued
Algorithm 4 Gate Reverberation (ST-ST)
Gate reverberation enables you to assign parameters such as gate time to each box of ch1, ch2 and center.
Parameters : | MIN and MAX Parameters el MIN and MAX::. Pa
gate time (ch1, ch2, center) {1 - 16383words center predelay time (ch1, ch2) 1 -30719words =
- 9 =
envelope form (ch1, ch2, center) | lineart, linear2 pinlneh Sieaies manne pe o a i é 3
exponential enter predelay p! : normal/inverse =
exponential2 early reflection time (ch1, ch2) 1 -30719words =a
envelope direction (ch1, ch2, center) |} normal/reverse early reflection level (ch1, ch2) 0- 100% S
envelope time (ch1, ch2, center) | 0.01 -99.99sec early reflection phase (ch1, ch2) | normal/inverse =
NO
center output level (ch1, ch2) 0-100% presence control 0.003 - 1.000 1
i re ]
center output phase (ch1, ch2) normal/inverse spread 05-25 m
release from 5-100 ae 05-25 os
predelay1,2 time (cht, ch2)
1 -30719words
: 3
predelay1,2 level (ch1, ch2) 0- 100% Note:
predelay1,2 phase (ch1, ch2) normal/inverse The smaller the value for the size parameter is, the smaller the
maximum effective value for the gate time parameter is.
direct
Gate box ch1
gate time, size, envelope form,
envelope direction, envelope time
early
reflection
Release box
release form,
chi ino spread
reverberation
Gate box center Acenter output
gate time, size, envelope form,
envelope direction, envelope time
center predela
A
Predelay ch2
VV VY
reflection é
Ch)
reverberation
che ino
Gate box ch2
gate time, size, envelope form,
direct
PARAMETERS OF EACH BLOCk y) 7