Samsung SP-LFF3CLAXXZA E-Manual page 68

Register and manage devices via SmartThings
Registering peripheral devices of the Projector
When there is a device detected near the Projector, a registration pop-up appears on the Projector screen.
1.
When there is no device detected, the pop-up may not appear.
To connect a Bluetooth device, make sure that the device has been paired.
2. Select Register to register the device.
To register an appliance, make sure that it uses IR and is detectable in the area around the Projector. Supported
devices and options may differ depending on the model.
Select Close. Then the device registration pop-up does not appear.
You can register a device in
Device.
(left directional button)
Try Now
device.
Supportable options may differ depending on the device.
Registering a Projector / Smart Appliance / IoT device from the mobile app
Use the mobile SmartThings app to register your Projector, smart appliances or various IoT devices. Some IoT
devices can only be registered using this mobile app. In the mobile app, tap the
Connect a doorbell to your Projector, to receive a notification of the doorbell video and speak with the visitor while
watching Projector.
Only WWST (Works with SmartThings) certified doorbells are supported. Supported options may vary, depending on the
device.
Try Now
(left directional button)
Connected Devices
- 68 -
Connected Devices
SmartThings, you can see available options for each
(Add Device) to register a device.
SmartThings Add