Table of Contents
Advertisement
Anynet+ (HDMI-CEC) Issues
When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem.
What is Anynet+?
You can use the Projector's remote control to control external devices that support Anynet+ (HDMI-CEC) and that
are connected to the Projector via an HDMI cable. For example, if a connected external device supports Anynet+,
you can have the connected device turn on or off when you turn the Projector on or off.
Anynet+ does not work. The connected device is not displayed.
Make sure the device is an
that the HDMI-CEC option is enabled.
From the Projector, check and confirm that the
•
(left directional button)
Anynet+ (HDMI-CEC)
Check and confirm that the device's power cord is securely plugged in.
Check the device's HDMI cable connection.
Anynet+ (HDMI-CEC)
cannot function under specific circumstances. (when the Projector is scanning channels or
performing Reset)
When connecting or disconnecting an HDMI cable, turn the Projector off and then back on again.
I want to start Anynet+. I also want the connected devices to turn on when
the Projector is turned on.
Check if the Anynet+ device is properly connected to the Projector, and then select
see if
Anynet+ (HDMI-CEC)
•
(left directional button)
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
device. From the settings menu on the device, check and confirm
Anynet+ (HDMI-CEC)
Settings
Try Now
is set to On.
Settings
Try Now
feature is set to On.
All Settings
Connection
All Settings
Connection
- 118 -
External Device Manager
Anynet+ (HDMI-CEC)
External Device Manager
menu to
Advertisement
Table of Contents
