Voice Recognition Does Not Work With The Samsung Smart Remote Unlike Other Features. There Is No Response Even If; During Voice Recognition, The Heavy Load Message Appears; Want To See Weather Information Of The Desired Area - Samsung SP-LFF3CLAXXZA E-Manual

Voice recognition does not work with the Samsung Smart Remote unlike
other features. There is no response even if the Voice Assistant button is
pressed.
The connection between the remote control and the Projector may be lost. Try pairing the remote control with the
Projector.
Point the Samsung Smart Remote at the front of the Projector, and then press and hold the
simultaneously for 3 seconds or more.
Also, if the remote control does not work properly or its response is very slow, the battery might be low or dead.
• Charge the remote control by using the USB port (C-type) on the bottom, or turn over the remote to expose the
solar cell.
– You can check remaining battery of Samsung Smart Remote with solar cell in
button) Settings
Battery.
Try Now
During voice recognition, the heavy load message appears and the function
does not work.
Unplug and then plug the Projector power cord and then try again after 1 minute and 30 seconds. It may take a
while if the voice recognition server is being inspected.
I want to see weather information of the desired area.
Say with the area name included.
All Settings General & Privacy
- 123 -
Power and Energy Saving
and buttons
(left directional
Available Remote