Table of Contents
Advertisement
The Projector automatically turns off by itself
If your Projector appears to turn off by itself, try disabling some of the Projector's energy efficiency functions.
See if
Sleep Timer
has been enabled. The
of time.
•
(left directional button)
Sleep Timer
Try Now
If the
Sleep Timer
has not been enabled, see if
•
(left directional button)
Auto Power Off
•
(left directional button)
Off Timer
Try Now
Unable to power on
If you are having problems powering on your Projector, there are a number of things to check before calling the
service department.
Confirm that the Projector's power cord is connected correctly at both ends and that the remote control is operating
normally.
Make sure that the Projector cable is firmly connected.
Displayed video looks blurry
If you notice blurring or juddering on the screen, use the
•
(left directional button)
Settings
Try Now
The picture is distorted
The compression of video content may cause picture distortions, especially in fast moving pictures from sports
programs and action movies.
Remove and reconnect the power cord, and check the remote control battery.
If the signal reception is weak or poor, screen distortion may be visible but it is not a malfunction.
Mobile phones used close to the Projector (within 3.2 ft) may cause noise on channels.
Sleep Timer
Settings
Settings
Try Now
Settings
Settings
automatically turns the Projector off after a specified period
All Settings
General & Privacy
Auto Power Off
or
Off Timer
All Settings
General & Privacy
All Settings
General & Privacy
Picture Clarity Settings
All Settings
Picture
- 110 -
System Manager
has been enabled and disable it.
Power and Energy Saving
System Manager
function to resolve the issue.
Expert Settings
Picture Clarity
Time
Time
Advertisement
Table of Contents
