Advertisement
Adjustment
Signal
of WHITE
generator
BALANCE
(SUB)
Remote
control unit
AV-32WP2EN
AV-32WP2EP
Description
. Set to 2 screen mode.
. Receive black and white signal on the right screen
. Select 7.PIP from the service MENU.
. Modify 3. SUB B-Y and 4. SUB R-Y data to adjust the white
balance of the right screen.
. Press the MENU key, and memorize the set values.
Adjustment
Remote
8.BRIGHT
of
control unit
SUB BRIGHT
Adjustment
Remote
9.CONT.
:
of
control unit
SUB CONT.
No.51237
. Receive any broadcast.
. Select 2.V/C from the SERVICE MENU.
. Select 8.BRIGHT with the FUNCTION UP/DOWN key.
. Set the initial setting value with the FUNCTION -/+ key.
. If the brightness is not the best with the initial setting value,
make fine adjustment until you get the best brightness.
. Press the MENU key and memorize the set value.
Receive any broadcast.
. Select 2.V/C from the SERVICE MENU.
. Select 9.CONT with the FUNCTION UP/DOWN key.
. Set the initial setting value with the FUNCTION - or + key.
. Ifthe contrast is not the best with the initial setting value, make
fine adjustment until you get the best contrast.
. Press the MENU key and memorize the set value.
21
Advertisement
