Advertisement
AV-32WP2EN
AV-32WP2EP
(3) Method of Setting
1) Method of Setting 1.1F
[1. VCO]
oO) 1 Key S40 land WiSdes o Weer Biers faveavosanere re Cate Select 1.IF.
@
1 Key Be bate lee ar-@. wile i hieiial'e. 6p Sane o eere 4
Select 1.VCO
@® The VCO (CW) screen will be displayed in yellow when the AFC voltage is at a certain level and in blue when it is at other levels.
@ INFORMATION Key ------+ +--+ As you press this twice, you will return to the SERVICE MENU.
[2. DELAY POINT]
oO 1 Key iB Sasa va 9. BoB Ces neice set awe, bi ane WR aye ee Select 1.1F.
@
2 Key a5 wie cev bev anerwyey'gneve Bue Steyele dere ey a Select 2.DELAY
POINT.
@ FUNCTION -/+ «++
e cece reer eens Set (adjust) the setting vaiues of the setting items.
@ MENU Key -ssrerse
eter reer eee Memorize the set value.
(Before storing the setting values in memory, do not press the CH, TV, POWER ON/
OFF keys
- if you do, the values will not be stored in memory.)
G) INFORMATION Key -----+++++=> When this is pressed twice, you will return to the SERVICE MENU.
2) Method of setting 2.V/C, 3.AUDIO, 4.DEF, 5.VSM PRESET and 7.PIP.
QD 25
7 Keyrrrs
reece ceeeeecees Select one from 2. V/C, 3. AUDIO, 4. DEF, 5. VSM PRESET and 7.PIP.
@ FUNCTION UP/DOUN Key -:---- Select setting items.
@ FUNCTION -/+ ores reece rere ee Set (adjust) the setting values of the setting items.
(When 1.RGB BLK of 2.V/C is selected, press the FUNCTION-/+ key, and the whole will
change to a black picture. Press the 2 key, and the screen will return to the original screen.)
@ MENU Key «++ s seer e eter eee es Memorize the setting value.
(Before storing the setting values in memory, do not press the CH, TV, POWER ON / OFF key -
if you do, the values will not be stored in memory.)
@ INFOMATION Key-+
+++ ++ +e+e e+: Return to the SERVICE MENU screen.
3) Method of setting 6.VPS and 8.AUTO PROGRAM.
G.VPS sect reset e cree eet eeeseecens This mode displayed monitor of VPS systems. Do not adjust
8.AUTO PROGRAM
<irrerrrsee
eee When the MAIN POWER is turned on with the state of AUTO PROGRAM ON, you get a mode
that initializes every existing set value including language selection. Because this mode is set
at the factory upon completion of the adjustment, you need not to use it for service. Do not
adjust in this mode.
(4) Release of SERVICE MENU
1) After compieting the setting, return to the SERVICE MENU, then again press the INFORMATION key.
No.51237
15
Advertisement
